Free Images - SnappyGoat.com- bestof:Navy 051102-N-2209D-024 Machinery Repairman 3rd Class Ronald A. Brumback measures the circumference of a hole drilled into solid steel stock using a lathe.jpg

Click Here for More Images from iStock- 15% off with coupon 15FREEIMAGES

ducted fan engine; fan engine; turbofan; turbofan engine

Female engineer checking machine in factory

Close-up of gray ships of the Russian Black Sea Fleet in the port of Sevastopol. A ship on guard of peace. Republic of Crimea, October 4, 2010

Boiro, village and harbor in Ría de Arousa, Rías Baixas, Pontevedra province, Galicia, Spain. High angle view, seascape, bateas.

View over the old sailing port of Kerkyra on the Greek island of Corfu with yachts and sailing boats in a glorious

Drone View Bitez Bay at Bodrum Turkey

Cage lifting rope machine. Modern mine equipment.

Procida beautiful island in the Tyrrhenian Sea in Italy

Eurocopter super puma flying in Alps

A boat show is a trade fair of current boat models, debuts, concept vessels. Limassol, Cyprus - May 23, 2024: Limassol Boat Show 2024 at Limassol Marina

Royal Deeside depot and Victorian station at Milton of Crathes just east of Banchory in the Aberdeenshire region of Scotland. The track follows part of the original line dating to 1853.

Payerne, Switzerland - August 29, 2014: French Army Eurocopter EC665 Tiger attack helicopter departing Payerne Airport.

Vila Nova de Gaia seen from the Dom Luis II bridge with the boats on the bank of the Douro river

Aerial view of port Hercules in Monaco - Monte-Carlo at sunny day, a lot of yachts and boats are moored in marina, mediterranean sea. High quality photo

ommercial jet flying over clouds

Close-up view of small airplane propeller

Cotton after the raw material was in the cotton mixing machine. The image shows as close-up how cotton is prepared for further working steps.

Nobody in empty aviation plane with dashboard control panel to start power engine and fly airplane. Navigation command with windscreen and radar compass, speed handle. Close up.

Calvi Harbor, Corsica, France.

Fuengirola, Spain - October 8, 2021: Dry dock in the port of Fuengirola, Andalusia, southern Spain

Satara, India - June 01 2024: Colourful Bell 427 helicopter parked in the countryside near Satara India.

man standing in factory workshop

Luxury yachts in the bay of Monaco, France

aerial panoramic photo of the island of Poros and the port of Galatas in Argosaronikos, Peloponnese, Greece at sunset

The Mil Mi-24 (Hind) is a large helicopter gunship, attack helicopter and low-capacity troop transport with room for eight passengers. It is produced by Mil Moscow Helicopter Plant and has been operated since 1972 by the Soviet Air Force and its successors, along with 48 other nations.

A construction worker works on a building remodel.

Picture of two submarines and an anchor on the ground. History, culture

Image of a focused repairman, a bearded guy, at a car workshop holding a broken engine part, and about to replace it with a new one. Checking closely what's happening with a care. He's wearing a working outfit with gloves

Free Images: "bestof:Navy 051102-N-2209D-024 Machinery Repairman 3rd Class Ronald A. Brumback measures the circumference of a hole drilled into solid steel stock using a lathe.jpg"

US_Navy_081014-N-7730P-067_Plane_captain_Aviation_Machinist's_Mate_3rd_Class_Kyle_Alhers_performs_morning_maintenance_on_an_F-A-18C_Hornet_aboard_the_Nimitz-class_aircraft_carrier_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_110504-N-IC111-759_Sailors_and_Marines_assigned_to_the_aircraft_carrier_USS_Ronald_Reagan_(CVN_76)_play_soccer_with_children_from_the_Youth.jpg

Defense_Department_Continues_Aid_on_California's_Fire_Front_DVIDS62640.jpg

US_Navy_960329-N-8167A-050_LST_taking_on_U.S._Marines_and_hardware.jpg

Flickr_-_Official_U.S._Navy_Imagery_-_Four_Navy_ships_underway_at_sunrise..jpg

Flickr_-_Official_U.S._Navy_Imagery_-_USS_Enterprise_underway_alongside_USS_Dwight_D._Eisenhower._(1).jpg

An-F14-Tomcat-assigned-to-the-Black-Knights-of-Fighter-Squadron.jpg

SLNSW 51284 Clearing site for Harbour Bridge workshops Dorman Long Co where the English steel plates were cut drilled and assembled Later site of Luna Park.jpg

US_Navy_051102-N-2209D-024_Machinery_Repairman_3rd_Class_Ronald_A._Brumback_measures_the_circumference_of_a_hole_drilled_into_solid_steel_stock_using_a_lathe.jpg

US_Navy_101102-N-1004S-144_Machinery_Repairman_Fireman_Gabriel_Martinez,_from_Great_Falls,_Mont.,_uses_a_lathe_machine_to_turn_down_a_piece_of_roun.jpg

US_Navy_070426-N-3560G-007_Machinery_Repairman_3rd_Class_Christian_Duarda_of_Naval_Mobile_Construction_Battalion_(NMCB)_4_adjust_the_cutting_angle_on_a_portable_lathe.jpg

US_Navy_050620-N-7869M-092_Machinery_Repairman_3rd_Class_Richard_Henegar_uses_a_lathe_machine_to_turndown_a_piece_of_carbon_steel_to_3-8_of_an_inch_for_threading.jpg

US_Navy_050713-N-6278K-017_Machinery_Repairman_3rd_Class_John_Sikora_of_Withrop,_Maine,_measures_hole_depths_for_a_job_in_the_Welding_Shop_aboard_the_Nimitz_class_aircraft_carrier_USS_George_Washington_(CVN_73).jpg

US_Navy_040727-N-5821P-015_Machinery_Repairman_3rd_Class_Desmond_Nelson_of_Stratford,_Conn.,_uses_a_lathe_to_machine_a_piece_of_stainless_steel.jpg

US_Navy_070413-N-3038W-042_Machinery_Repairman_3rd_Class_Anthony_Gerhardt_creates_a_guide_pin_for_support_equipment_using_a_lathe_in_the_machine_shop_aboard_Nimitz-class_aircraft_carrier_USS_John_C._Stennis_(CVN_74).jpg

US_Navy_040721-N-1464F-002_Machinery_Repairman_3rd_Class_Marissa_Cooper_turns_down_a_piece_of_brass_using_a_Standard_20_inchlathe_aboard_the_guided_missile_cruiser_USS_Thomas_S._Gates_(CG_51)_during_UNITAS_45-04.jpg

US_Navy_110401-N-1004S-322_Machinery_Repairman_2nd_Class_Ashley_Lauterwasser_uses_a_hammer_and_screw_driver_to_clear_debris_from_a_door_hole_aboard.jpg

US_Navy_060323-N-0555B-009_Machinery_Repairman_Fireman_Brain_Barr_uses_a_lathe_to_machine_a_bronze_coupler_in_the_machine_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_Ronald_Reagan_(CVN_76).jpg

Flickr_-_Official_U.S._Navy_Imagery_-_Saint_Louis_native-Sailor_clears_debris_from_door_hole..jpg

USS_Carl_Vinson_machine_shop_activity_141025-N-TP834-019.jpg

US_Navy_070219-N-2959L-001_Machinery_Repairman_2nd_Class_Ronald_Brumback_watches_closely_as_he_carefully_mills_a_new_part_in_the_machine_shop_on_board_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_060403-N-4133B-131_Machinery_Repairman_2nd_Class_Ronald_Brumback_performs_maintenance_on_a_deck_edge_door_in_the_hangar_bay_aboard_the_Nimitz-class_aircraft_carrier_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_070126-N-3038W-078_Machinery_Repairman_3rd_Class_Anthony_Gerhardt_prepares_the_lathe_for_finishing_cuts_on_brass_couplings_in_the_machining_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_John_C._Stennis_(CVN_74).jpg

US_Navy_030901-N-2824H-001_Machinery_Repairman_3rd_Class_Mark_Lindsey_utilizes_a_lathe_to_manufacture_a_repair_part_for_a_sewing_machine_aboard_USS_Essex_(LHD_2).jpg

US_Navy_080923-N-2456S-032_Machinery_Repairman_3rd_Class_Bryan_Smith_uses_a_Lathe_to_make_hammer_handles.jpg

US_Navy_061026-N-4133B-083_Machinery_Repairman_3rd_Class_Kevin_Weeks_from_San_Gabriel,_Calif.,_manufactures_a_clasp_on_a_universal_mill_in_the_machine_shop_aboard_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_080625-N-3946H-036_Machinery_Repairman_3rd_Class_Russell_Stull,_of_Kipton,_Ohio,_measures_the_diameter_of_a_brass_plug_in_the_machine_shop_aboard_the_aircraft_carrier_USS_Kitty_Hawk_(CV_63).jpg

US_Navy_050517-N-7130B-018_Machinery_Repairman_3rd_Class_Kevin_Weeks_uses_a_universal_milling_machine_to_mill_a_piece_of_aluminum_in_the_machine_shop_aboard_the_Nimitz-class_aircraft_carrier_USS_Ronald_Reagan_(CVN_76).jpg

US_Navy_040406-N-9630B-014_Machinery_Repairman_3rd_Class_Floyd_Francis,_of_Ocala,_Fla.,_machines_a_brass_fitting_for_a_fire_pump_on_a_metal_lathe_aboard_USS_George_Washington_(CVN_73).jpg

US_Navy_090319-N-5251G-401_Machinery_Repairman_3rd_Class_Dayna_Droher_mills_a.jpg

US_Navy_080815-N-9079D-298_Machinery_Repairman_3rd_Class_Tim_D._Moody,_from_Wyalusing,_Pa.,_drills_holes_to_make_blank_flanges_in_the_machine_shop_aboard_the_aircraft_carrier_USS_Abraham_Lincoln_(CVN_72).jpg

US_Navy_060502-N-7711S-134_Machinery_Repairman_3rd_Class_Kevin_Weeks_drills_threading_into_a_metal_fitting_in_the_repair_shop.jpg

US_Navy_030311-N-4154B-511_Machinery_Repairman_2nd_Class_Adam_Lemoyne_works_with_a_metal_lathe_in_the_engineering_department_aboard_USS_Theodore_Roosevelt_(CVN_71).jpg

US_Navy_050104-N-9079D-181_Machinery_Repairman_1st_Class_Scott_Sullivan,_of_Salem,_Mass.,_cuts-out_a_screw_on_a_lathe_machine_in_the_Repair_Shop_aboard_the_guided_missile_destroyer_USS_Benfold_(DDG_65).jpg

US_Navy_080923-N-2456S-051_Machinery_Repairman_2nd_Class_Bryan_Gilliam_uses_a_Lathe_to_make_a_new_flange.jpg

US_Navy_050522-N-1205S-050_Machinery_Repairman_2nd_Class_Boyd_Bagnall_of_Sheridan,_Ore.,_tightens_a_drill_bit_on_a_lathe_in_the_Machine_Repair_Shop_aboard_USS_Nimitz_(CVN_68).jpg

US_Navy_040406-N-2385R-001_Machinery_Repairman_2nd_Class_Boyd_Bagnall,_of_Sheridan,_Ore.,_completes_a_threading_job_on_a_lathe_in_the_machine_shop_aboard_the_nuclear_powered_aircraft_carrier_USS_Nimitz_(CVN_68).jpg

US_Navy_040703-N-9954W-031_Machinery_Repairman_3rd_Class_Floyd_Francis,_of_Ocala,_Fla.,_uses_a_micrometer_to_measure_metal_stock_in_the_Machine_Shop_aboard_the_Nimitz-class_aircraft_carrier_USS_George_Washington_CVN_73.jpg

US_Navy_051221-N-2838C-002_Machinery_Repairman_2nd_Class_Derrick_Call_turns_a_Hossfeld_pipe_bender_mounting_block_on_a_lathe_aboard_the_Nimitz-class_aircraft_carrier_USS_Theodore_Roosevelt_(CVN_71).jpg

US_Navy_051221-N-2838C-003_Machinery_Repairman_2nd_Class_Derrick_Call_turns_a_Hossfeld_pipe_bender_mounting_block_on_a_lathe_aboard_the_Nimitz-class_aircraft_carrier_USS_Theodore_Roosevelt_(CVN_71).jpg

US_Navy_060420-N-9723W-167_Machinery_Repairman_2nd_Class_Cody_Sterling_repairs_a_valve_using_a_lathe.jpg

US_Navy_090203-N-2636M-054_Machinery_Repairman_1st_Class_Ruben_Arocho_and_Machinery_Repairman_Fireman_Anthony_Harris_manufacture_a_shaft_on_a_lathe.jpg

US_Navy_091212-N-4959G-008_Machinery_Repairman_2nd_Class_Christopher_Afanador_makes_bolts_using_a_Lathe_machine.jpg

US_Navy_080823-N-9079D-092_Machinery_Repairman_1st_Class_Larry_W._Wallace,_from_Bremerton,_Wash.,_cuts_out_dual_warfare_plaques_with_the_band_saw_in_the_carpentry_shop_aboard_the_aircraft_carrier_USS_Abraham_Lincoln_(CVN_72).jpg

US_Navy_040618-N-8148A-037_Machinery_Repairman_2nd_Class_Michael_Wallace,_left,_from_Jackson,_Ohio,_ensures_a_milling_machine_drill_bit_shaves_a_key_way_precisely_at_the_pre-aligned_position_on_a_tension_wrench.jpg

US_Navy_050528-N-7730P-011_Machinery_Repairmen_3rd_Class_Weeks_performs_repairs_on_the_ships_number_four_collection,_holding_and_transfer_tank.jpg

US_Navy_110224-N-6451W-003_Machinery_Repairman_2nd_Class_Carmen_Vescio_performs_corrective_maintenance_on_a_sliding_padeye_aboard_the_guided-missil.jpg

US_Navy_080923-N-2456S-055_Machinery_Repairman_Fireman_Rob_Conz_uses_a_mill_to_drill_a_hole.jpg

US_Navy_030220-N-5786V-503_Machinery_Repairman_Fireman_Ernesto_Alvarado_from_Houston,_Texas,_manufactures_parts_using_a_tool_room_lathe_aboard_USS_Theodore_Roosevelt_(CVN_71).jpg

US_Navy_030227-N-9403F-006_Machinery_repair_aboard_USS_Abraham_Lincoln_CVN_72.jpg

Flickr_-_Official_U.S._Navy_Imagery_-_A_Sailor_exercise_aboard_USS_Cowpens..jpg

US_Navy_111130-N-JB593-102_Machinery_Repairman_Fireman_Darryl_Dayrit,_assigned_to_the_submarine_tender_USS_Frank_Cable_(AS_40),_operates_a_gap_lath.jpg

US_Navy_101102-N-1004S-065_Machinery_Repairman_Fireman_Mark_Lepore,_from_Rochester,_N.Y.,_uses_a_pneumatic_die_grinder_to_cut_wiring_holes_in_the_b.jpg

US_Navy_070515-N-3560G-042_Utilitiesman_3rd_Class_Heranio_Wagayen_of_Naval_Mobile_Construction_Battalion_(NMCB)_4_constructs_a_Modular_Protected_Building_(MPB)_to_be_used_for_guard_shacks_and_billeting.jpg

US_Navy_021109-N-0685W-004_Machinery_Repairman_3rd_Class_Sonier_C._Dela_Cruz,_from_San_Bernardino,_Calif.,_makes_brackets_and_hinges_to_repair_broken_doors_aboard_the_aircraft_carrier.jpg

US_Navy_050316-N-8770A-002_Machinery_Repairman_3rd_Class_Jaime_Keith_of_Bruceton,_Tenn.,_programs_the_Haas_Tool_Room_Mill_to_mill_brackets_for_an_EA-6B_Prowler.jpg

US_Navy_070404-N-9760Z-022_Machinery_Repairman_3rd_Class_Seas_Yeatman_works_on_fixing_a_flange_aboard_the_aircraft_carrier_USS_Nimitz_(CVN_68).jpg

US_Navy_070507-N-5248R-005_Machinery_Repairman_3rd_Class_James_Scott_aboard_USS_Theodore_Roosevelt_(CVN_71)_grinds_down_metal_to_make_a_valve_plug_with_a_horizontal_mill.jpg

US_Navy_051202-N-9866B-006_Machinery_Repairman_3rd_Class_William_Peterson,_the_assistant_leading_petty_officer_of_the_Machine_Shop,_bores_holes_for_night_vision_goggle_test_equipment.jpg

US_Navy_051202-N-9866B-009_Machinery_Repairman_3rd_Class_William_Peterson,_the_assistant_leading_petty_officer_of_the_Machine_Shop,_bores_holes_for_night_vision_goggle_test_equipment.jpg

US_Navy_040826-N-0057P-021_Machinery_Repairman_3rd_Class_Phillip_Stewart,_of_Great_Falls,_Mont.,_works_in_the_machine_shop_with_a_laythe_to_machine_down_an_adaptor_for_a_flange.jpg

US_Navy_040904-N-5837R-001_Machinery_Repairman_3rd_Class_Lucas_McArdle,_of_Nyssa,_Ore.,_uses_a_table_saw_to_build_a_fire_fighter_stand_in_the_Carpenter_Shop_aboard_the_Nimitz-class_aircraft_carrier_USS_Abraham_Lincoln_(CVN_72).jpg

US_Navy_081022-N-2183K-131_Machinery_Repairman_3rd_Class_Felipe_Torres_fills_a_ruptured_pipe_with_oakum_and_wood.jpg

US_Navy_060303-N-5884M-002_Machinery_Repairman_3rd_Class_Matthew_Watson,_files_down_a_bolt_from_a_water-tight_hatch_aboard_the_Nimitz-class_aircraft_carrier_USS_Dwight_D._Eisenhower_(CVN_69).jpg

US_Navy_060529-N-1332Y-450_Machinery_Repairman_3rd_Class_Callie_Ramsay_from_Detroit,_removes_metal_shavings_after_milling_a.jpg

US_Navy_090918-N-8560K-071_Machinery_Repairman_3rd_Class_Jared_T._Shaver_assigned_to_the_aircraft_carrier_USS_George_H.W._Bush_(CVN_77)_serves_a_tray_of_food_during_a_lunchtime_meal_at_St._Vincent_De_Paul_Catholic_Church.jpg

US_Navy_110406-N-OY799-152_Machinery_Repairman_3rd_Class_Heather_Fogle,_from_Midlothian,_Texas,_checks_the_outside_diameter_of_a_shear_pin_in_the_m.jpg

US_Navy_110427-N-5031T-048_Machinery_Repairman_3rd_Class_Chelsea_Martinez_fabricates_a_Teflon_bushing_in_the_sheet_metal_shop_aboard_USS_John_C._St.jpg

US_Navy_110708-N-CH661-003_Machinery_Repairman_3rd_Class_Joshua_J._Mills_fabricates_a_door_hinge_aboard_the_aircraft_carrier_USS_Enterprise_(CVN_65.jpg

US_Navy_110803-N-BT887-022_Machinery_Repairman_3rd_Class_Chris_Smigielski,_from_Daytona_Beach,_Fla.,_adds_pins_to_a_lock_aboard_the_Nimitz-class_ai.jpg

US_Navy_110803-N-BT887-024_Machinery_Repairman_3rd_Class_Chris_Smigielski,_from_Daytona_Beach,_Fla.,_adds_pins_to_a_lock_aboard_the_Nimitz-class_ai.jpg

US_Navy_120128-N-OH194-117_Machinery_Repairman_3rd_Class_Tyler_long_adjusts_a_sprinkler_group_during_an_operational_test_of_the_countermeasure_wash.jpg

Terms of Use Search of the Day